bpa wrote: > Is it a permissions issue ? LMS runs under a different userid compared > to the one you tested arecord. Compare what group the userid LMS uses > and compare to the user id you ran the test. > > edit: > > Being pedantic all Alsa device designator need two numbers otherwise a > default is used. i.e use plughw:1,0 not plughw:1 > > Also post output from arecord -L so that it is clear what devices are on > your system.
Tested with LMS running as squeezeboxserver (install default), and as root - same result (as defined in /etc/default/logitechmediaserver) >>squeezeboxserver : nogroup, root (I added it to group root) root@raspberrypi:/home/pi# arecord -l **** List of CAPTURE Hardware Devices **** card 1: Device [USB PnP Sound Device], device 0: USB Audio [USB Audio] Subdevices: 1/1 Subdevice #0: subdevice #0 root@raspberrypi:/home/pi# arecord -L null Discard all samples (playback) or generate zero samples (capture) default:CARD=Device USB PnP Sound Device, USB Audio Default Audio Device sysdefault:CARD=Device USB PnP Sound Device, USB Audio Default Audio Device front:CARD=Device,DEV=0 USB PnP Sound Device, USB Audio Front speakers surround21:CARD=Device,DEV=0 USB PnP Sound Device, USB Audio 2.1 Surround output to Front and Subwoofer speakers surround40:CARD=Device,DEV=0 USB PnP Sound Device, USB Audio 4.0 Surround output to Front and Rear speakers surround41:CARD=Device,DEV=0 USB PnP Sound Device, USB Audio 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=Device,DEV=0 USB PnP Sound Device, USB Audio 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=Device,DEV=0 USB PnP Sound Device, USB Audio 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=Device,DEV=0 USB PnP Sound Device, USB Audio 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers iec958:CARD=Device,DEV=0 USB PnP Sound Device, USB Audio IEC958 (S/PDIF) Digital Audio Output dmix:CARD=Device,DEV=0 USB PnP Sound Device, USB Audio Direct sample mixing device dsnoop:CARD=Device,DEV=0 USB PnP Sound Device, USB Audio Direct sample snooping device hw:CARD=Device,DEV=0 USB PnP Sound Device, USB Audio Direct hardware device without any conversions plughw:CARD=Device,DEV=0 USB PnP Sound Device, USB Audio Hardware device with all software conversions ------------------------------------------------------------------------ nicnet's Profile: http://forums.slimdevices.com/member.php?userid=65409 View this thread: http://forums.slimdevices.com/showthread.php?t=49584 _______________________________________________ plugins mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/plugins
