David: Agreed. In principle the concept is sound. I suppose all I need to know is which pins on the Sure GPS carry the Ground, TX, RX, and DCD. On the 18 LVC that appears to be 1,2,3, and 5. Do you or anybody else have the Sure GPS pinouts from the board?
On Tue, Oct 23, 2012 at 5:37 AM, David J Taylor < [email protected]> wrote: > -----Original Message----- From: AlbyVA > [] > > Hal: > > Are the Sure Electronic GPS units using the same pins as the Garmin 18 LVC > units? If so, I can create a similar data/power cable like you've detailed > on your website. > [] > > Alby, > > If you mean my Web site, while the pin-out of the 18 LVC and the Sure > board is different, there's no reason in principle why the cable couldn't > be the same. It needs to carry 5 signals: power, ground, TX, RX, and PPS. > On my 18x LVC install I split the cable end to a 9-pin RS-232 connector > (ground, TX, RX, DCD) and USB power-only connector (ground and power). The > Garmin has a directly connected multi-core cable, the Sure has a DB9 RS-232 > connector and USB connector. > > Cheers, > David > -- > SatSignal Software - Quality software written to your requirements > Web: http://www.satsignal.eu > Email: [email protected] > ______________________________**_________________ > pool mailing list > [email protected] > http://lists.ntp.org/listinfo/**pool <http://lists.ntp.org/listinfo/pool> >
_______________________________________________ pool mailing list [email protected] http://lists.ntp.org/listinfo/pool
