OK, here is my finding so far. I think the trouble arose mainly from the separator/delimiter between the command and the parameter, in the case of the icon field. (Once again, there is no problem to execute the commands)
The separator/delimiter is 1) "0x13": if the command field contains "explicit" spaces and is not enclosed in "..."; so, there could be no problem at all since the separator can be readily distinguished. 2) "0x20" (i.e., space): otherwise; The separator is merely a "space", so there could possibly be some ambiguity to clear-cut between command & parameter, until the whole line is parsed with a certain rule, e.g., word(1,command_parameter_line) or whatever. "%" might possibly interfere with the parsing procedure, that I don't really know. As a matter of fact, if I replaced "0x20" with "0x13" in the .pcf file for the problematic cases, all the troubles disappeared, i.e., they worked as they should be. However, in the imported ini file cases, putting the Command Field in the quotes seems the only work-around... Sean ------------------------ Yahoo! Groups Sponsor --------------------~--> Make a clean sweep of pop-up ads. Yahoo! Companion Toolbar. Now with Pop-Up Blocker. Get it for free! http://us.click.yahoo.com/L5YrjA/eSIIAA/yQLSAA/JV_rlB/TM --------------------------------------------------------------------~-> Attention: PowerPro's Web site has moved: http://www.ppro.org Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/power-pro/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
