--- In [email protected], "brucexs" <[EMAIL PROTECTED]> wrote: > > Some things things to try (try any one of these by itself): > 1. Width 3d option off, change height of buttons with command > list|properties|height. > > 2. With 3d option on, after positioning bar, change position > to "locked" and use Desktop setworkarea to reserve top of screen for > bar (make it a startup scheduled event). > > 3. With 3d option on, and bar across whole top of screen, change bar > size to full screen (current size). Set vertical offset to about - 4 > to get rid of any gap between bar and working area of screen, if > desired. >
Hi brucexs, 1. The Button Height control does nothing on my PowerPro. It's currently set to 0, but I could set it to any value (my buttons are 48x48), and there will be no change. This is the option I'd like to get work - as the 3d option is off, and that means I can't accidentally drag the PowerPro bar to 0 (it probably wouldn't be so bad, but I've found that when you drag it to 0 height, there is no easy way to restore your bar). Everytime I've tried, the last 5 backups have all been of the '0 height' configuration variety, so I've had to resort to randomly changing the Positions field (currently Top Edge Full Screen), and usually after about 20 minutes of trying, a tiny little bit of the bar will be shown, just enough for me to somehow persuade it to become normal size again. Anyway, is there some sort of trick to making this Button Height option actually do something? (just of note, I've managed to screw up the height again. After trying to get the Button Height option to work, I turned on the 3d option, and dragged the bar so it was just a little less high, intending to switch the option off and see if it had any effect on the bottom of the icons being cut off. Unfortunately, now the bottom of my icons is cut off on all views. I've tried dragging it to be more high, but it just resets itself and ignores what height you dragged it to. And yes, the last 5 backups are all of this stuffed up configuration). I think maybe the number of backups needs to be changed so it goes back a day or two. 5 is just too few) CM ------------------------ Yahoo! Groups Sponsor --------------------~--> Get fast access to your favorite Yahoo! Groups. Make Yahoo! your home page http://us.click.yahoo.com/dpRU5A/wUILAA/yQLSAA/JV_rlB/TM --------------------------------------------------------------------~-> Attention: PowerPro's Web site has moved: http://www.ppro.org Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/power-pro/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
