brucexs wrote (on 05.09.2006 15:54): > 1. Setting pixel blend ordinary checked, transparency to 1, then > text shows but wrong color and also there are transparent areas > around the letters.
I can't reproduce this one (WinXP Pro SP2). No matter what I try, I can't get text be shown if pixel blending is normal/gray-checked. > 2. Uncheck pixel blend, set transparency to 255, set bar background > color to black. This seems to work with basic testing. Yes this works, but it also breaks the ICOs/PNGs with black pixels in them. BTW, with these settings, the transparent areas around the letters you mention above appear here as well, if the textcolor is the same as bgcolor or if I use no textcolor. If I change one of textcolor's RGB by 1 point, everything's fine. > Also note that I have set the button width to 142 because PowerPro > adds 2 pixels to the set width for drawing button borders (even if > you turn them off with flat). (I won't change this as it would > likely bread too many existing configs). That's fine with me. A while ago, Alan Martin also pointed this out. If I use an ultraflat (FlatFlat) skin with no borders, I can specify the normal width in the skin file though, and this is enough. Thanks for all the fish and so long Cüneyt Attention: PowerPro's Web site has moved: http://www.ppro.org Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/power-pro/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
