On Tue, 2009-08-11 at 09:12 -0700, Kok, Auke wrote:
> Armijn Hemel wrote:
> > On Mon, 2009-08-10 at 16:28 -0700, Kok, Auke wrote:
> >> notice the wireless device is running and _on_
> >>
> >> not sure why you're unable to write to power_level. Can you try using
> >> iwpriv to
> >> set the power level and see if that works?
> >
> > Odd.
> >
> > # iwpriv wlan1 get_power
> > wlan1 no private ioctls.
>
> what does iwconfig say?
wlan1 IEEE 802.11abg ESSID:""
Mode:Managed Frequency:2.412 GHz Access Point:
Not-Associated
Tx-Power=0 dBm
Retry min limit:7 RTS thr:off Fragment thr=2352 B
Encryption key:off
Power Management:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
lspci says:
02:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG
[Golan] Network Connection (rev 02)
Subsystem: Intel Corporation Device 1041
Flags: bus master, fast devsel, latency 0, IRQ 25
Memory at 54000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [c8] Power Management version 2
Capabilities: [d0] MSI: Mask- 64bit+ Count=1/1 Enable+
Capabilities: [e0] Express Legacy Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Device Serial Number cd-e7-3b-ff-ff-02-13-00
Kernel driver in use: iwl3945
Kernel modules: iwl3945
armijn
--
-------------------------------------------------------------------------
[email protected] | http://www.uulug.nl/ | UULug: Utrecht Linux Users Group
-------------------------------------------------------------------------
_______________________________________________
Power mailing list
[email protected]
http://www.bughost.org/mailman/listinfo/power
