Frank Modica wrote:

>  I was pointed to a site that
> showed how to replace the fuse, but it entails soldering, and I've never
> soldered anything.
>
> 1.  Would it be worthwhile and/or reasonably cost efficient to pay someone
> else to replace the fuse?

If you could get the case apart and make the fuse easily accessible, it's
about a 5 minute job to solder.
Do you have a local Mac Users Group? I'll bet you can find someone who would
do it for you for free if you went to them and brought all the parts. I sure
would if you were a tad closer to Seattle. '-)
Even an electronics store or computer repair place shouldn't charge you more
than $10 to do this job. Remember, I said shouldn't, not wouldn't.

>
> 2.  Or am I better off buying another 170 from ebay and swapping my RAM and
> hard drive into it?

No. If it's only the fuse, it would be better to fix it and to find a new
power supply.

>
> 3.  As for the power adaptor...are there good replacements available that
> won't short out fuses?

Don't know that one.

>
> 4.  Is soldering something best left to an experienced electronics person?

Soldering is fun. It takes about 5 minutes to learn, and maybe an hour to do
relatively well unless you have a natural feel for it. I soldered and taught
soldering for 8 years and loved it. It's cheap; a low wattage iron goes for
less than $10 at Radio Shack, and i'll bet you can find a junk board to
practice on somewhere. You'll need rosin core solder, and solderwick to do a
nice job. There must be little handbooks if you don't have someone to teach
you, or I'll bet that directions are somewhere on the net.
If not, feel free to email me and we can go from there. This is not a big
deal, and you can do it.
jt


-- 
PowerBooks is sponsored by <http://lowendmac.com/> and...

 Small Dog Electronics    http://www.smalldog.com   | Enter To Win A |
 -- Canon PowerShot Digital Cameras start at $299   |  Free iBook!   |

      Support Low End Mac <http://lowendmac.com/lists/support.html>

PowerBooks list info:   <http://lowendmac.com/lists/powerbooks.shtml>
Send list messages to:  <mailto:[EMAIL PROTECTED]>
To unsubscribe, email:  <mailto:[EMAIL PROTECTED]>
For digest mode, email: <mailto:[EMAIL PROTECTED]>
Subscription questions: <mailto:[EMAIL PROTECTED]>
Archive: <http://www.mail-archive.com/powerbooks%40mail.maclaunch.com/>

Using a Macintosh? Get free email and more at Applelinks! 
<http://www.applelinks.com>

Reply via email to