On the 1400 you have to use the 6.04 software install. See my post of
about 9-5-02 or so for detailed comments from the Lucent engineer/support
about this and the ftp site link to the older version.
They said the 1400 would not work with 7.x version. They also said that
out of the box my Orinoco card might not have the latest firmware, but it
should be new enough to be OK regardless.
Make sure you have WEP disabled for your first tests to rule out encryption
issues.
Brian
>Has anyone gotten a silver orinoco to work on a 1400, vs 7.2 supposely fixes
>this problem...I have an att broadband cable modem into an airport rev 2
>base station...my 2400 reads it flawllessly with a skyline card, but have
>failed to get the orinoco to work off the bsation...the 1400 recognizes the
>station, but for some reason I cannot actually connect to the net or get
>email on the 1400...any help or advice...I've heard somewhere that there is
>a firmware update for this card, but cannot find it at any website...if
>anyone knows of this, can you send it to me, or point me in the right
>direction...
>TIA
>Tom
--
--
PowerBooks is sponsored by <http://lowendmac.com/> and...
Small Dog Electronics http://www.smalldog.com | Enter To Win A |
-- Canon PowerShot Digital Cameras start at $299 | Free iBook! |
Support Low End Mac <http://lowendmac.com/lists/support.html>
PowerBooks list info: <http://lowendmac.com/lists/powerbooks.shtml>
--> AOL users, remove "mailto:";
Send list messages to: <mailto:[EMAIL PROTECTED]>
To unsubscribe, email: <mailto:[EMAIL PROTECTED]>
For digest mode, email: <mailto:[EMAIL PROTECTED]>
Subscription questions: <mailto:[EMAIL PROTECTED]>
Archive: <http://www.mail-archive.com/powerbooks%40mail.maclaunch.com/>
Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
