Hi listmembers, I have a problem with a PB 100 series (SCSI) hard drive: I have a 180c with a defective drive and a 145B with defective screen or video circuitry. In the 145B I could hear the drive boot, so it seems to be okay; of course I can't see anything. The 145B has neither SCSI disk mode nor video out, so I couldn't access the data on the drive in any way. So I put the 145B drive into the 180c, because I need some data from the drive and want to pull it over to my 3400 via SCSI disk mode. But the drive is not activated in the 180c. And I can't activate it neither with drive setup from a disk tools floppy from OS 7.1 or 7.5.3 nor from the 3400's drive setup (OS 9.1) when it's connected to the 3400 via SCSI disk mode. I can test the drive, but I cannot activate it. I also tried to activate the drive with Norton Disk Doctor from the 3400, but this crashes the 3400 instantly. Any help? Please let me add that I cannot initialize the drive before getting the data off the drive.
Thanks Alex -- PowerBooks is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Enter To Win A | -- Canon PowerShot Digital Cameras start at $299 | Free iBook! | Support Low End Mac <http://lowendmac.com/lists/support.html> PowerBooks list info: <http://lowendmac.com/lists/powerbooks.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/powerbooks%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
