Not at CR3. When benchmarking with several sites we have seen more problems with procedures, processes, HP and worker human performance(key control issues and worker confusion)....than for those who do not lock at less than 1 R/hr. Thanks for putting out the question.....please send me your summary of what info was captured.
Bryant From: [email protected] [mailto:[email protected]] On Behalf Of Seabock, Mike Sent: Wednesday, August 03, 2011 6:29 AM To: '[email protected]' Subject: Powernet: RE: HRA Controls HNP- Not required, some areas are locked due being infrequently entered and require a survey upon entry when entry is needed. We do perform a weekly walk down of all HRAs to ensure proper controls remain in place From: [email protected] [mailto:[email protected]] On Behalf Of Felice, Jared Sent: Tuesday, August 02, 2011 6:27 PM To: '[email protected]' Subject: Powernet: HRA Controls I know this has been asked before......... My questions are in regards to HRA's <1000 mr/hr. Do you lock HRA's behind normal plant doors? Do you lock swing gates? Do you issue keys to locked HRA's to non RP personnel? Do you require a second check of locked HRA's? Thanks in advance, Jared Felice Radiation Protection Supervisor Pacific Gas & Electric 805-545-6484 [email protected]
