If you can figure out how to keep everyone from dropping them, let us all
know!:)
Vic
Laizzes le bon temps rouler!
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of
BRAJUHA Zach(ZR) - BRUCE POWER
Sent: Wednesday, May 02, 2012 7:16 AM
To: [email protected]
Subject: RE: Powernet: RE: Dropped ED registering faulty dose rates
Thanks everyone for your response to this question. You have assured me
that this is not localized to just us, and you have highlighted a good
solution via histrogram to determine true alarms vs mechanical shock
induced alarms. I just need to figure out how to prevent people from
dropping them all the time.
I appreciate you taking the time out of your day to respond to this
question.
Cheers,
Zach Brajuha
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf
Of Seabock, Mike
Sent: Sunday, April 29, 2012 10:26 PM
To: [email protected]
Subject: Powernet: RE: Dropped ED registering faulty dose rates
HNP- Dropped ED's from a height of approximately waste high onto a hard
surface will produce a dose rate alarm most of the time. The dosimeter
if in a low now area will produce a short chirp and that is all.
Histograms are verified and in all dropped ED cases the alarm is for 1
second minimal recordable.
Michael Seabock
Lead Radiation Protection Specialist
Progress Energy - Carolinas
Harris Nuclear Plant
919.362.2808
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf
Of BRAJUHA Zach(ZR) - BRUCE POWER
Sent: Thursday, April 26, 2012 10:36 AM
To: [email protected]
Subject: [Marketing Mail] Powernet: Dropped ED registering faulty dose
rates
Good morning,
We have recently started using DMC2000S electronic dosimeters and have
received several reports in the field of dose rate alarms after the
device has has been dropped.
We are currently working with the vendor to analyze the specific
dosimeters in questions, but I'm wondering if anyone else in the
industry has experienced this problem.
I would like to know if this issue is specific to some of the dosimeters
we have received, or if this has affected other plants?
Any information is greatly appreciated.
Thanks,
Zach Brajuha
RP FLM (Acting)
Bruce Power
(519) 361-2673 ext. 12851
-----------------------------------
Powernet - a service of the Health Physics Society Power Reactor Section
Powernet archives at http://www.mail-archive.com/[email protected]/
Reply to: [email protected]
If Questions, contact Mike Russell, CHP at [email protected]
-----------------------------------
Powernet - a service of the Health Physics Society Power Reactor Section
Powernet archives at http://www.mail-archive.com/[email protected]/
Reply to: [email protected]
If Questions, contact Mike Russell, CHP at [email protected]
-----------------------------------
Powernet - a service of the Health Physics Society Power Reactor Section
Powernet archives at http://www.mail-archive.com/[email protected]/
Reply to: [email protected]
If Questions, contact Mike Russell, CHP at [email protected]
-----------------------------------
Powernet - a service of the Health Physics Society Power Reactor Section
Powernet archives at http://www.mail-archive.com/[email protected]/
Reply to: [email protected]
If Questions, contact Mike Russell, CHP at [email protected]
