What is your Current Dose Assessment Software Solution? CNS utilizes a homemade application CNS DOSE Does the software have Multi-Unit Capability? Not at this time. We only have one unit. Does the software have Multi-Source Capability? No, however we will have a procedural method for performing multisource dose assessment in the coming weeks. We are currently working with our IT group to develop upgrades to CNS DOSE to perform multisource dose assessment.
Jeremy Bebb Staff Health Physicist Cooper Nuclear Station (402) 825-5026 From: [email protected] [mailto:[email protected]] On Behalf Of [email protected] Sent: Friday, May 24, 2013 2:13 PM To: powernet@ Cc: [email protected] Subject: Powernet: Dose Assessment Software Survey Folks, With regard to the multi-unit/multi-source dose assessment, I would like to perform a brief survey to see what software solution people intend on using to establish the capability. This could be useful for future benchmarking/alignment opportunities, bulk purchasing opportunities, etc. I will put together the summary of the responses by 5/31, and send out the results for all to benefit. I appreciate you taking the time to complete this survey and any additional comments are welcome. ------------------------------------------------------------------------------------------------------------------------------------------ Licensee Name: What is your Current Dose Assessment Software Solution? Does the software have Multi-Unit Capability? Does the software have Multi-Source Capability? If your software does not have Full Capability Dose Assessment have you identified an alternative software solution? ------------------------------------------------------------------------------------------------------------------------------------------- Example filled out survey: Licensee Name: Southern California Edison (2 units) What is your Current Dose Assessment Software Solution? Raddose V Does the software have Multi-Unit Capability? Not full capability. Dose assessment can be performed currently on each unit then and manually sum the output Does the software have Multi-Source Capability: Yes, up to 3 sources per unit If you software does not have Full Capability Dose Assessment, have you identified an alternate software solution? TBD. Potentially upgrade Raddose V or new software package Thanks, Joe Torkelsen Project Manager of SONGS Fukushima Event Response San Onofre Nuclear Generating Station Southern California Edison, W53 [email protected]<mailto:[email protected]> PAX: 82930 Cell: 631-764-3634 Sandra Sewell, CHP Radiation Protection Technical San Onofre Nuclear Generating Station (949) 368-9111 PAX 89-111 ----------------------------------- Powernet - a service of the Health Physics Society Power Reactor Section Powernet archives at http://www.mail- archive.com/[email protected]/<mailto:archive.com/[email protected]/> Reply to: [email protected]<mailto:[email protected]> If Questions, contact Mike Russell, CHP at [email protected]<mailto:[email protected]>
