From PSEG Nuclear 1. Do you use the dose and/or rate alarm warnings available with the DMC2000/DMC 3000?
We used dose warning from 199? (inception of EDs) to 2014 2. If you do, why and what issues have you had? No issues 3. If you don't, why not? It was deemed too confusing for the worker 4. Do you use the rate alarm latching feature? No 5. What access control software do you use and what version is it? ProRad unsure of version From: [email protected] [mailto:[email protected]] On Behalf Of Bradley A Krupp Sent: Tuesday, April 01, 2014 7:44 AM To: [email protected] Cc: Adam C Horne; Benjy P Bertossi Subject: Powernet: ED warning alarms and latching rate alarm Fermi 2 would like feed back from our industry peers on the following: 1. Do you use the dose and/or rate alarm warnings available with the DMC2000/DMC 3000? 2. If you do, why and what issues have you had? 3. If you don't, why not? 4. Do you use the rate alarm latching feature? 5. What access control software do you use and what version is it? 6. Please provide a contact for additional information. Thanks in advance for your assistance. Brad Krupp ----------------------------------------- The information contained in this e-mail, including any attachment(s), is intended solely for use by the named addressee(s). If you are not the intended recipient, or a person designated as responsible for delivering such messages to the intended recipient, you are not authorized to disclose, copy, distribute or retain this message, in whole or in part, without written authorization from PSEG. This e-mail may contain proprietary, confidential or privileged information. If you have received this message in error, please notify the sender immediately. This notice is included in all e-mail messages leaving PSEG. Thank you for your cooperation.
