I've searched the archive, but couldn�t find anything relating to my particular problem.
It's the first time I've printed A3 on my Epson 1160 and there is what appears to be some kind of pressure mark, presumably from a roller that is outside the A4 area (which is why I hadn't seen it before. I'm printing on Lyson smooth fine art with Fotonic inks. Depending on what angle I hold the print I can see a thin (1mm thick?) line running vertically through the print that is only visible in the dark areas. Almost as if that part of the matte paper has become 'glossier'; had it's surface pushed down to make it smoother and therefore reflective. I've been peering into the printer with a torch. I knew this wouldn't help but I felt I should try and do something. If someone has any more constructive advice, I would be very grateful. Regards Richard Lewisohn. P.S. This is a somewhat embarrassing extra question, but is it true that no increase in quality will be seen on an inkjet printer if the printed file's resolution is more that 240dpi? =============================================================== GO TO http://www.prodig.org for ~ GUIDELINES ~ un/SUBSCRIBING ~ ITEMS for SALE
