> Jay Busse wrote: Using skew, I usually pull in the top corners to correct, (having once been told it's better to squeeze pixels than stretch them) which leaves the product looking a bit tall and skinny. So I typically reduce the height by about half of what I pull in horizontally.
>>My guess is you are pulling the bottom corners out and achieving the opposite result - short and squatty Yes, that is correct. (Using distort to pull out each corner the necessary amount) In future I will push in instead of pulling out. (good advice in life generally) I also measure the actual product to achieve a similar ratio of height to width in the image. Harder to do with architectural exteriors. Regards, Tim Tim Wheeler Wheeler Studios www.wheelerstudios.com.au =============================================================== GO TO http://www.prodig.org for ~ GUIDELINES ~ un/SUBSCRIBING ~ ITEMS for SALE
