On 4 Mar 2004, at 17:26, Peter Birch wrote:
Having run my camera on a 400 MHz G4 since day one, I decided to upgradePeter
to a 1.25 GHz Dual Boot G4.
However after two days of trying, I cannot get the Mac to see the
Camera, which from bitter experience I know is almost certainly the
Keyspan Serial Port/USB adapter that connects to the Sinarcams power
supply.
I had this issue recently - what worked for me (after reading Keyspan's instructions again - you cannot have both versions of Keyspan on the same machine & nor should you need to) is don't just use the uninstaller from Keyspan. Do finder find files for all files to do with Keysapn, both on your OSX & OS9 partitions. Make sure all these are trashed completely. Reboot. Re-install just the OS version of Keyspan you need (would that be just for OS9 for your Sinarcam?) and load it in the correct partition - obviously!! Do as the installer procedure says, check that it's using the right port (turning off/disconnecting your Sinarcam before should help) - and that worked for me. Hope this helps.
Jason
t:01252 333159 f:01252 655159 i:01252 333159 www.jasonbutcher.co.uk
=============================================================== GO TO http://www.prodig.org for ~ GUIDELINES ~ un/SUBSCRIBING ~ ITEMS for SALE
