RE: [PRODIG] Scanners SCSI prob?

[Thomas Maugham]

Title: Message

If you don't have a SCSI port in your computer the scanners won't work. If by some stroke of luck there is a SCSI port you will have to load the appropriate drivers for the scanner following the directions for the scanner.  Then after that's done shut down the pc, hook up the scanner and turn it on then turn on the pc.    I can't help you with the G4 but I have an SS4000 hooked up to my pc.  If you need more info e-mail me off list and I'll try to help. [EMAIL PROTECTED]   Good luck...   Tom   Hi All   I've borrowed both a Polaroid Sprintscan 4000 and a Nikon Coolscan III LS-30 for the weekend. Both seem to require SCSI ports, and of course I've neither in either my PC or Mac G4. The PC has a port the lead (50/25 pin SCSI) will fit into, the 25 point end that is. Although when either scanner is plugged into this slot the PC can't or won't see it. Anyone any tips on how I can get either scanner to work with either computer?   Thanks Yours Rob Mac