Andrew W. Riley III Talon Instruments 150 East Arrow Highway San Dimas, California 91773 (909) 599-0690 [voice] (909) 599-6529 [fax] www.taloninst.com [EMAIL PROTECTED] ICQ#: 100686794 -----Original Message----- From: Andrew W. Riley III [mailto:[EMAIL PROTECTED]] Sent: Tuesday, February 13, 2001 3:50 PM To: [EMAIL PROTECTED] Subject: RE: [PROTEL EDA USERS]: having W2k installed, can I run... Matt, Now you have me doubting my setup, darn it! I will verify when I get home, and post whether or not my new glasses work or my addled brain is in dire need of a rest. Drew Andrew W. Riley III Talon Instruments 150 East Arrow Highway San Dimas, California 91773 (909) 599-0690 [voice] (909) 599-6529 [fax] www.taloninst.com [EMAIL PROTECTED] ICQ#: 100686794 > -----Original Message----- > From: TSListServer [mailto:[EMAIL PROTECTED]]On > Behalf Of Matt Pobursky > Sent: Tuesday, February 13, 2001 3:31 PM > To: Multiple recipients of list proteledausers > Subject: RE: [PROTEL EDA USERS]: having W2k installed, can I run... > > > On Tue, 13 Feb 2001 15:05:10 -0800, Andrew W. Riley III wrote: > ....snip... > >> Will W2k tolerate dual screen-setup with totally independed > >> screen-settings? > > > >Yes. At home I use NVidia's GeForce2 MX (a dual-port w/TV-out) > running a 20" > >Silicon Graphics @ 1152x864 and a 15" Magitronics @ 800x600, > both at High > >Color (16-bit)... checking e-mail while watching a route is > great eye-candy > >for me. > > Will this really work? All of the "dual head" video card sites > I've checked > (Matrox and ATI) say that Win2K limits the 2nd display to the > same resolution > and color depth as the primary monitor. They SPECIFICALLY say > it's a Win2K > limitation and not a driver limitation. I am running a Matrox > G400 MAX 32MB > Dualhead card on a Viewsonic 21" (1600x1200 32bpp) and > 17"(1280x1024 32bpp) > with Win98SE because of this. I would LOVE to switch to Win2K as > my primary OS > if I don't have to give up dual monitor support. > > Matt Pobursky > Maximum Performance Systems > > > > > * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * > * This message sent by: PROTEL EDA USERS MAILING LIST > * > * Use the "reply" command in your email program to > * respond to this message. > * > * To unsubscribe from this mailing list use the form at > * the Association web site. You will need to give the same > * email address you originally used to subscribe (do not > * give an alias unless it was used to subscribe). > * > * Visit http://www.techservinc.com/protelusers/subscrib.html > * to unsubscribe or to subscribe a new email address. > * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * > * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * This message sent by: PROTEL EDA USERS MAILING LIST * * Use the "reply" command in your email program to * respond to this message. * * To unsubscribe from this mailing list use the form at * the Association web site. You will need to give the same * email address you originally used to subscribe (do not * give an alias unless it was used to subscribe). * * Visit http://www.techservinc.com/protelusers/subscrib.html * to unsubscribe or to subscribe a new email address. * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * ________________________________________________________ To leave the EDAFORUM discussion list, send a email with 'leave edaforum' in the body to '[EMAIL PROTECTED]' More Information : http://www.dolist.net
