Any tracks or arcs on the MultiLayer will also choke it up.

Go Single Layer(SHIFT+S) then the Multilayer and make sure there is nothing
there except pads.

I also set up menu items to stop and restart the AutoRoute server for when I
am testing different ways of routing.

Process:
Client:SetupEDAServers

Parameters
Server=ROUTE|Action=STOP

The parameters need to be separated with the Pipe symbol(Usually Shift+\)

Another menu item with the Action=START will get it going again... or you
can tell it ot route all and it should re-initialize on its own.

It never hurts to try shutting down this server to make sure it isn't choked
up on something a re-start wont fix.

Colby
----- Original Message -----
From: Tim Hutcheson <[EMAIL PROTECTED]>
To: Multiple recipients of list proteledausers
<[EMAIL PROTECTED]>
Sent: Tuesday, February 13, 2001 8:56 PM
Subject: RE: [PROTEL EDA USERS]: auto router went on strike and will not
route anymore!


> Gordon,
>
> My favorite, I'm sure, is when I first started with 99SE, I accidentally
> placed a circle or arc segment on a routing layer when I was marking some
> screw holes.  That kills it for sure.  It tied me up for days.  Look for
an
> arc somewhere...
>
> Tim Hutcheson
>
>
>
> * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
> *  This message sent by: PROTEL EDA USERS MAILING LIST
> *
> *  Use the "reply" command in your email program to
> *  respond to this message.
> *
> *  To unsubscribe from this mailing list use the form at
> *  the Association web site. You will need to give the same
> *  email address you originally used to subscribe (do not
> *  give an alias unless it was used to subscribe).
> *
> *  Visit http://www.techservinc.com/protelusers/subscrib.html
> *  to unsubscribe or to subscribe a new email address.
> * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
>



* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
*  This message sent by: PROTEL EDA USERS MAILING LIST
*
*  Use the "reply" command in your email program to
*  respond to this message.
*
*  To unsubscribe from this mailing list use the form at
*  the Association web site. You will need to give the same
*  email address you originally used to subscribe (do not
*  give an alias unless it was used to subscribe).
*
*  Visit http://www.techservinc.com/protelusers/subscrib.html
*  to unsubscribe or to subscribe a new email address.
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

________________________________________________________

To leave the EDAFORUM discussion list, send a email with
'leave edaforum' in the body to '[EMAIL PROTECTED]'

More Information : http://www.dolist.net

Reply via email to