I think the answer is you have to have the Pin 'Named' as 1a, 1b etc but the
pin 'number' as the usual 1, 2, 3 etc. Then to make it clear on the
schematic you show the name but hide the number, set this in the dialog box
as you place the pins in the symbol editor. All you have to do then is
ensure that the foot print pin numbering matches the schematic pin numbering
(most important, check and re-check)

Regards

TC

>  -----Original Message-----
> From:         "Brian Watson" <[EMAIL PROTECTED]>  
> Sent: Monday, August 06, 2001 7:41 AM
> To:   Protel EDA Forum
> Subject:      [PEDA] alphabetic pin numbers
> 
> 
> 
> Greetings,
> 
> One of my fellow users asked me how to build a connector that has multiple
> rows with pins numbered alphabetically. This one had more that 26 pins per
> row and went something like 1A, 1B ,1C, ....... 1a, 1b, 1c etc.
> 
> I could not give him a good answer.
> 
> Has anybody had to deal with such a situation?
> 
> regards
> 
> Brian

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*                      - or email -
* mailto:[EMAIL PROTECTED]?body=leave%20proteledaforum
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Browse or Search previous postings:
* http://www.mail-archive.com/proteledaforum@techservinc.com
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Reply via email to