I wanted to add a pull-down menu to the PCB main menu bar, so I opened
the customize menu, and pressed edit with the PCBmenu selection
highlighted.
I then right-clicked and pressed "add" and named the menu, this is where
I got stuck B4 as I couldn't work out how to make it a pull-down menu,
but you just add another process, name it, select the operation(this
bits all in the handbook), but this bit isn't; right-click on the new
process and use the "Up" and "Down" commands to position it under your
new menu heading, right-click again and press the "Right" command, which
creates a tree structure.
-----Original Message-----
From: Coleman, Tim [mailto:[EMAIL PROTECTED]]
Sent: 15 August 2001 13:43
To: Protel EDA Forum
Subject: Re: [PEDA] Creating Menus
So how did you do it? Please share you new found wisdom, I was waiting
for a
good reply to your question!
Cheers
TC
> -----Original Message-----
> From: "Stephen Smith" <[EMAIL PROTECTED]>
> Sent: Wednesday, August 15, 2001 12:35 PM
> To: PEDA (E-mail)
> Subject: Re: [PEDA] Creating Menus
>
> Do not worry about this!! I just figured it out.
>
> I want to add my own menu, and I worked out how to add menu
> items, but I can't find a way to add expanding menus, other than to
copy
> an existing one and edit it. I just want to know if there is an
easier
> way of doing this?
>
> Steve
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
* - or email -
* mailto:[EMAIL PROTECTED]?body=leave%20proteledaforum
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Browse or Search previous postings:
* http://www.mail-archive.com/proteledaforum@techservinc.com
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
