Tommy,
        here is my best guess at this moment.

        On the Browse PCB Print tab, click on the printer to highlight it,
right click to bring up properties. Check the "Print What" area on the right
mid way down the page. Is the "Selected Objects Only" checked? If it is
checked, then the only items which will display or print are items within
the PCB file which are selected. I would suggest that you try again with the
"Selected Objects Only" unchecked. You will probably have to process the PCB
again, possibly it will do it automatically when you have clicked OK after
changing the setting.

Brad Velander,
Lead PCB Designer,
Norsat International Inc.,
#300 - 4401 Still Creek Dr.,
Burnaby, B.C., V5C 6G9.
Tel. (604) 292-9089 direct
Fax (604) 292-9010
website www.norsat.com


> -----Original Message-----
> From: Tommy Åkesson [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, September 04, 2001 11:09 AM
> To: Protel EDA Forum
> Subject: [PEDA] printing problem
> 
> 
> Hello all
> 
> All of a sudden the power print doesent show anything?
> It has worked quit perfekt earlier.
> All layer is selected, pressing "Rebuild" or "Process PCB" 
> keep resulting in
> a
> blank paper. ( target pcb is selected )
> Erase PPC file doesent help, getting same result.
> 
> Any ideas??
> 
> Tommy

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Forum Guidelines Rules:
* http://www.techservinc.com/protelusers/forumrules.html
*
* Browse or Search previous postings:
* http://www.mail-archive.com/proteledaforum@techservinc.com
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Reply via email to