Since it seems that nobody of us really knows what value ATS is to us, I
suggest to post our problems to both, the Protel (Altium) Technical
Support and the proteledaforum. I do this with the question regarding
the crash of 99SE SP6 I just had this morning:

I tried to generate a BOM with the wizard from the reports menu. I
unchecked the footprint and description boxes but checked all the
library field boxes. The output format was client spreadsheet. After
automatically opening all sheets of the project the client 99SE error
message "License information for TF1Book is invalid" appeared. Pressing
the OK button lets the BOM Wizard window on the screen. Trying a second
time to push the Finish button results in an information box "Cannot
open Spread document". Pushing again the OK button returns to the design
with the (blank) spreadsheet tab active but no screen update occours.
Closing the spreadsheet results in the Client 99SE error message "Access
violation at address 40067324 in module 'VCL50.bpl'. Write of address
0000014C.". Pressing OK lets close all documents and the ddb. After
having compressed the ddb (while closing) the same access violation
errormessage appears again. After pressing OK Client 99SE can be closed
as usual but generates a Dr. Watson application error message. It seems
that the PC has to be rebooted for Protel to work properly again
(restarting Clint99SE is not sufficient).
Does anybody have any idea what might be wrong or what exactly is going
on? I'm using 99SE SP6 on NT4 latest SP (don't recall the number) and
the access ddb format.

Any help appreciated, TIA!

Regards,

Emanuel
 
-- 

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
MPL AG                      www.mpl.ch
Emanuel Zimmermann          [EMAIL PROTECTED]
Manager R&D                 Phone: +41 (0)56 483 34 34
Taefernstrasse 20           Fax:   +41 (0)56 493 30 20

CH-5405 Daettwil
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Forum Guidelines Rules:
* http://www.techservinc.com/protelusers/forumrules.html
*
* Browse or Search previous postings:
* http://www.mail-archive.com/proteledaforum@techservinc.com
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Reply via email to