This might be a little off-topic, but I am designing a little RS-232 adapter with a DB-25 connector mounted directly to a small PC board and it has to fit into one of those little plastic housings for DB-25 connector adapters. The spacing between the pins on several sources of DB-25 connectors is around .050-.055, while standard board thickness is .062. I can jam the board in with a lot of force, but I have seen DB-25 connectors with the pins sort of formed, where a regular board slides in nicely. Does anyone know who makes those DB-25 connectors with the slightly wider spacing between pins on the back?
Or alternately does anyone know of a source for PCB material that is around .050 thick instead of .062. (Two sided board) I would use the PC mount version of the DB-25, but it doesn't fit in the little plastic std housing. Thanks for any help you can give. Lloyd Johnson DSS San Marcos, CA * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[email protected] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
