Still playing with this, I discovered that it works if your PCB is set
to imperial, but not metric.
It seems that the schematic editor can only use imperial
measurements......well it seems like that to me.  Anyone know how to
change this, as I generally use metric!!

Steve

>I want to use the PCBLayoutDirective, so that I can set up design rules
>from the schematic.
>I've never used it before, but I've figured out how to use them, and
>transfer them to the PCB, but why won't Protel let me edit the track,
or
>via width to less than 1mm.......I can't have 1mm tracks everywhere.

>Steve 

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Forum Guidelines Rules:
* http://www.techservinc.com/protelusers/forumrules.html
*
* Browse or Search previous postings:
* http://www.mail-archive.com/proteledaforum@techservinc.com
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Reply via email to