Steve,
It appears that you have found the quirk called "you can only use whole numbers". I tried setting an imperial track with to a decimal and it does not accept it. Protel also does not seem to accept any track width containing a decimal value (ie. 0.5mm, 7.5mm, 0.5mil, or 7.5mil). Does this seem to be the problem? Anthony Whitesell Sunrise Labs 603-644-4500 mailto:[EMAIL PROTECTED] > I want to use the PCBLayoutDirective, so that I can set up design rules > from the schematic. > I've never used it before, but I've figured out how to use them, and > transfer them to the PCB, but why won't Protel let me edit the track, or > via width to less than 1mm.......I can't have 1mm tracks everywhere. > > Steve * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[email protected] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
