How about updating PCB first? (BOM is generated from PCB, not from SCH!) mit freundlichen Gr��en
Heiko Vachek elektronik 21 GmbH > -----Original Message----- > From: Florian Finsterbusch [mailto:[EMAIL PROTECTED]] > Sent: Tuesday, March 19, 2002 2:05 PM > To: Protel EDA Forum > Subject: [PEDA] Problem when generating BOM > > > I have a problem when generating the BOM with Protel-99SE-SP6: > > 1.) I have changed the value of a capacitor in the schematics > (in the Part Type Field) > > 2.) Generating the BOM from the CAM-Manager > > 3.) When opening the BOM-File, the capacitor has the old value. > But the timestamp shows that i'm viewing the new generated BOM. > (The old BOM was closed before i've generated the new one) > > > I've tried different things to get rid of this behaviour: > - saving the schematic before generating the BOM > - deleting the old BOM before generating the new one > - closing and reopening the Project-File before generating the BOM > - closing and reopening Protel > - ... > > But the problem still remains. > > Any suggestions what i can do to get the actual BOM? > > > Best regards, Florian Finsterbusch > > * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[email protected] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
