Hello Heiko,

thank you for your advice.
Problem is fixed.

Best regards, Florian Finsterbusch


> -----Original Message-----
> From: Heiko Vachek [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, March 19, 2002 2:16 PM
> To: 'Protel EDA Forum'
> Subject: Re: [PEDA] Problem when generating BOM
>
>
> How about updating PCB first?
> (BOM is generated from PCB, not from SCH!)
>
> mit freundlichen Gr  en
>
> Heiko Vachek
> elektronik 21 GmbH
>
> > -----Original Message-----
> > From: Florian Finsterbusch [mailto:[EMAIL PROTECTED]]
> > Sent: Tuesday, March 19, 2002 2:05 PM
> > To: Protel EDA Forum
> > Subject: [PEDA] Problem when generating BOM
> >
> >
> > I have a problem when generating the BOM with Protel-99SE-SP6:
> >
> > 1.) I have changed the value of a capacitor in the schematics
> > (in the Part Type Field)
> >
> > 2.) Generating the BOM from the CAM-Manager
> >
> > 3.) When opening the BOM-File, the capacitor has the old value.
> > But the timestamp shows that i'm viewing the new generated BOM.
> > (The old BOM was closed before i've generated the new one)
> >
> >
> > I've tried different things to get rid of this behaviour:
> > - saving the schematic before generating the BOM
> > - deleting the old BOM before generating the new one
> > - closing and reopening the Project-File before generating the BOM
> > - closing and reopening Protel
> > - ...
> >
> > But the problem still remains.
> >
> > Any suggestions what i can do to get the actual BOM?
> >
> >
> > Best regards, Florian Finsterbusch
> >
> >
>
>

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Forum Guidelines Rules:
* http://www.techservinc.com/protelusers/forumrules.html
*
* Browse or Search previous postings:
* http://www.mail-archive.com/proteledaforum@techservinc.com
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Reply via email to