For what purpose this parameter can be used? I wanted to establish rule to avoid positioning vias too close to SMD pads in fan-outs. So I set following rule:
Scope1: Object Kind: SMD Pad, Scope2: Object Kind: Via, Connectivity: Same Net Only, Gap: 7mil. My whole board clearance was 10mils. Everything worked as expected, but this rule took precedence over whole board clearance rule for SMD Pad - Via regardless of nets involved. It seems like "Same Net Only" functions like "Any Net". For instance when I placed GND via close to Vcc pad (report-primitives=8mils) it was not flagged as DRC error. I must deactivate this rule before final DCR, but I'm interested what is the purpose for this parameter? -- Tomasz Grodnicki * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/proteledaforum@techservinc.com * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *