You need to have entries in your schematic symbols Library fields (enter in
Schematic Library editor).  These fields designate type of model or
subcircuit, location and name of model or subcircuit, and pin assignments of
your symbol to the models internal pinout.

see Library Fields and Part Fields   pg. 247 in the Protel Designers
Handbook ( great.. ask for help and get RTFM ;) )

also see Creating Your Own Simulation Ready Components in the online help
index

also copy (and ajust to your setup) the Library fields from an existing
simulation ready component.

Duane Foster

-----Original Message-----
From: Tim Hutcheson [mailto:[EMAIL PROTECTED]]
Sent: Friday, April 12, 2002 11:02 PM
To: Protel EDA Forum
Subject: [PEDA] Creating a part for simulation from netlist



I have the netlist for the guts of an OPA548 and have created a schematic
symbol to represent it and placed it in a test circuit with the schematic
editor.  I want to simulate this circuit using the netlist of the OPA548 as
the subckt representation to be used in the simulation, without any specific
SPICE data to model the 548.

When I try to create the netlist of my circuit for simulation, I get the
following type of errors:

A2 Error: Pin order data (PINS=1:[<pins>]) not in READ ONLY field 4. Pins
sorted by pin-name.
A2 Error: Part type must be entered in READ ONLY field 1: type=<part
type>(<spice prefix>)
A2 Error: Netlist data must be entered in READ ONLY field 5:
netlist=<netlist data>
A3 Error: Pin order data (PINS=1:[<pins>]) not in READ ONLY field 4. Pins
sorted by pin-name.
A3 Error: Part type must be entered in READ ONLY field 1: type=<part
type>(<spice prefix>)
A3 Error: Netlist data must be entered in READ ONLY field 5:
netlist=<netlist data>.....

Can someone provide a quick refresher on how this works and what I need to
do?


regards,

Tim Hutcheson
Institute for Human and Machine Cognition
40 S. Alcaniz St.
Pensacola, FL 32503
805-202-4461

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Forum Guidelines Rules:
* http://www.techservinc.com/protelusers/forumrules.html
*
* Browse or Search previous postings:
* http://www.mail-archive.com/proteledaforum@techservinc.com
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Reply via email to