Check out the help topic "PCB Design Layers".

The "multilayer" is a Protel concept, a bit strange at first... it shows
things that exist on more than one layer -- this is mainly holes, pads, and
vias.

Layers you mentioned that aren't in the help...

I've never seen a layer called "Part Numbers"; the part designators (often
called ref-des for reference designators) are normally part of the
silkscreen layer -- text, part outlines, etc., that's printed on the top
and/or bottom of the pcb.  But you can rename layers in Protel, so maybe
some example designs have a layer called that.

Template_Dimensions - there's usually at least one "mechanical" layer that
shows the outline of the board, often with dimension markers.

> -----Original Message-----
> From: Waheed Bajwa
> Sent: Friday, May 17, 2002 12:17 AM
>
> Ok here are some more information requiring issues...
>
> What is:
>
> Top/Bottom Paste layer
> Top/Bottom Solder layer
> Drill Guide layer
> Drill Drawing layer
> Silkscreen
> Part Numbers layer
> Template_Dimensions layer

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Forum Guidelines Rules:
* http://www.techservinc.com/protelusers/forumrules.html
*
* Browse or Search previous postings:
* http://www.mail-archive.com/proteledaforum@techservinc.com
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Reply via email to