> For the fonts that don't render correctly you may have to tell the PDF writer to
> embedd the fonts. I haven't seen a problem with the arcs.
>
> Rob

    This sometime can be related to the outer margin settings.  I usually set my outer 
margins to as small ass possible, & then,
shrink the auto % size by 0.1%.  After this, everything seems to come through 
perfectly fine.


____________
Brian Guralnick

----- Original Message -----
From: <[EMAIL PROTECTED]>
To: "Protel EDA Forum" <[EMAIL PROTECTED]>
Sent: Wednesday, July 10, 2002 3:45 PM
Subject: Re: [PEDA] Acrobat 5 on Schematics


>
>
> For the fonts that don't render correctly you may have to tell the PDF writer to
> embedd the fonts. I haven't seen a problem with the arcs.
>
> Rob
>
>
>
>
>
> "Brian Sherer" <[EMAIL PROTECTED]> on 07/10/2002 01:07:22 PM
>
> Please respond to "Protel EDA Forum" <[EMAIL PROTECTED]>
>
> To:   "Protel EDA Forum" <[EMAIL PROTECTED]>
> cc:    (bcc: Rob LaMoreaux/DSPT)
>
> Subject:  [PEDA] Acrobat 5 on Schematics
>
>
>
> I have Adobe Acrobat v5.0.5 under Win'98 and '99SE SP6 with 512 MB RAM,
> and it works OK on Schematic files with the exception that arcs of certain
> diameters located within 20% of the right edge of the sheet are not
> rendered at all.
> This includes such objects as the arcs used to create AND gates. It also
> fails to
> render certain specific larger font sizes, such as 20pt. These are for the
> most part
> B sheets;  the effect doesn''t seem related to sheet size or circuit
> complexity.
> I'm using the default Acrobat settings.
>
> Brian
> Foothill Services LLC
>
> At 09:49 AM 7/10/02 -0700, you wrote:
> >I reccomend adobe acrobat for pcb files.
> >However, version 4 on w2000 sp2  does not work on sch files.  For those I
> >use efax.  For low cost if you subsribe to efax, you can use their prit
> >driver/display software to export to tiff or jpeg.
> >
> >Does anyone know if acrobat 5 works with sch files?
> >
> >Mike
> >----- Original Message -----
> >From: "Yuriy Khapochkin" <[EMAIL PROTECTED]>
> >To: "Protel EDA Forum" <[EMAIL PROTECTED]>
> >Sent: Wednesday, July 10, 2002 7:37 AM
> >Subject: [PEDA] PPC to word insertion
> >
> >
> >> Does anybody know how to insert PPC (PCBPrint) image into Microsoft Word?
> >> I would appreciate any ideas better, than printing -> scanning.
> >>
> >> Yuriy Khapochkin.
> >>
> >> ************************************************************************
> >> * Tracking #: A90690A739593B4B829B4449AA8525A82604F7AC
> >> *
> >> ************************************************************************
> >>
> >
>
>
>
>
>
>

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Forum Guidelines Rules:
* http://www.techservinc.com/protelusers/forumrules.html
*
* Browse or Search previous postings:
* http://www.mail-archive.com/proteledaforum@techservinc.com
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Reply via email to