I've seen this too , although in a weird variation. Just some of the letters would disappear , so the words had holes . I had to change the font type to make this go away
----- Original Message ----- From: "Brian Guralnick" <[EMAIL PROTECTED]> To: "Protel EDA Forum" <[EMAIL PROTECTED]> Sent: Thursday, July 11, 2002 3:19 PM Subject: Re: [PEDA] Acrobat 5 on Schematics > > For the fonts that don't render correctly you may have to tell the PDF writer to > > embedd the fonts. I haven't seen a problem with the arcs. > > > > Rob > > This sometime can be related to the outer margin settings. I usually set my outer margins to as small ass possible, & then, > shrink the auto % size by 0.1%. After this, everything seems to come through perfectly fine. > > > ____________ > Brian Guralnick > > ----- Original Message ----- > From: <[EMAIL PROTECTED]> > To: "Protel EDA Forum" <[EMAIL PROTECTED]> > Sent: Wednesday, July 10, 2002 3:45 PM > Subject: Re: [PEDA] Acrobat 5 on Schematics > > > > > > > > For the fonts that don't render correctly you may have to tell the PDF writer to > > embedd the fonts. I haven't seen a problem with the arcs. > > > > Rob > > > > > > > > > > > > "Brian Sherer" <[EMAIL PROTECTED]> on 07/10/2002 01:07:22 PM > > > > Please respond to "Protel EDA Forum" <[EMAIL PROTECTED]> > > > > To: "Protel EDA Forum" <[EMAIL PROTECTED]> > > cc: (bcc: Rob LaMoreaux/DSPT) > > > > Subject: [PEDA] Acrobat 5 on Schematics > > > > > > > > I have Adobe Acrobat v5.0.5 under Win'98 and '99SE SP6 with 512 MB RAM, > > and it works OK on Schematic files with the exception that arcs of certain > > diameters located within 20% of the right edge of the sheet are not > > rendered at all. > > This includes such objects as the arcs used to create AND gates. It also > > fails to > > render certain specific larger font sizes, such as 20pt. These are for the > > most part > > B sheets; the effect doesn''t seem related to sheet size or circuit > > complexity. > > I'm using the default Acrobat settings. > > > > Brian > > Foothill Services LLC > > > > At 09:49 AM 7/10/02 -0700, you wrote: > > >I reccomend adobe acrobat for pcb files. > > >However, version 4 on w2000 sp2 does not work on sch files. For those I > > >use efax. For low cost if you subsribe to efax, you can use their prit > > >driver/display software to export to tiff or jpeg. > > > > > >Does anyone know if acrobat 5 works with sch files? > > > > > >Mike > > >----- Original Message ----- > > >From: "Yuriy Khapochkin" <[EMAIL PROTECTED]> > > >To: "Protel EDA Forum" <[EMAIL PROTECTED]> > > >Sent: Wednesday, July 10, 2002 7:37 AM > > >Subject: [PEDA] PPC to word insertion > > > > > > > > >> Does anybody know how to insert PPC (PCBPrint) image into Microsoft Word? > > >> I would appreciate any ideas better, than printing -> scanning. > > >> > > >> Yuriy Khapochkin. > > >> > > >> ************************************************************************ > > >> * Tracking #: A90690A739593B4B829B4449AA8525A82604F7AC > > >> * > > >> ************************************************************************ > > >> > > > > > > > > > > > > > > > * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[email protected] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
