Open a dummy PCB document. Select the first arrow pointing down at the top left of the menu bar & go into Customize / Shortcut Keys.
Select PCBHotKeys. Chose Menu/Edit. Now, you should have a list of all the current PCBHotKeys. Scroll down the list to all of the PCB:Zoom functions. On the right, you should see the PgUp/PgDn & Shift+PgUp/Shift+PgDn. On the left where is says only 'PCB:Zoom', right click & choose properties. In the middle of the properties, invert the check 'Shift' modifier key for the 4 PgUp & PgDn commands. Close/Close & you are done. Good luck. ____________ Brian Guralnick [EMAIL PROTECTED] Voice (514) 624-4003 Fax (514) 624-3631 ----- Original Message ----- From: "Tony Karavidas" <[EMAIL PROTECTED]> To: "Protel EDA Forum" <[EMAIL PROTECTED]> Sent: Wednesday, July 24, 2002 4:04 AM Subject: Re: [PEDA] Zooming in & out... > How do you reverse those? > > > > > -----Original Message----- > > From: Brian Guralnick [mailto:[EMAIL PROTECTED]] > > Sent: Wednesday, July 24, 2002 12:53 AM > > To: Protel EDA Forum > > Subject: [PEDA] Zooming in & out... > > > > > > I think too much BS is being said about Protel's zoom process. > > > > If you have trouble maintaining visual focus of your location > > after zooming in & out, instead of using PageUP & PageDown, try > > Shift-PageUp & Shift-PageDown. The 1/10th size step really helps > > you maintain visual location & adjust your mouse movements & > > orientation while you work. > > > > In my case, I reversed the Shift-Page* keys with the > > non-Shift-Page* versions so the normal PageUp & PageDown works at > > 1/10th steps. > > > > > > ____________ > > Brian Guralnick > > [EMAIL PROTECTED] > > Voice (514) 624-4003 > > Fax (514) 624-3631 > > > > > > > > > > ************************************************************************ > > * Tracking #: 3E795800A5E25344B5A992755EC26454A19E5BF6 > > * > > ************************************************************************ > > > > * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[email protected] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
