just to clarify terms here
don't you really mean 'starting weight' 1oz copper not '1 oz plating'?

1/2 oz starting wt is used for finer pitch and lines and 2 oz for some
power applications

the traditional tin lead plating is in addition to that

Dennis Saputelli

Brad Velander wrote:
> 
> Shawn,
>         Your welcome. Here is some further info.
>         Daniel and I had a discussion offline about my comments on copper
> plating limitations at Enigma. Seems that Daniel says he receives boards
> with platings that I was told they couldn't (or more correctly, wouldn't)
> do. So my comments may not be pertinent. If you query Enigma about that
> issue then you can maybe answer us back with some final word. I know that
> they have two shops, Washington State and B.C., maybe there is some
> difference there and for one reason or another my boards were destined for
> the shop that only did 1 oz. copper plating.
> 
> Sincerely,
> Brad Velander.
> 
> Lead PCB Designer
> Norsat International Inc.
> Microwave Products
> Tel   (604) 292-9089 (direct line)
> Fax  (604) 292-9010
> email: [EMAIL PROTECTED]
> http://www.norsat.com
> 
> -----Original Message-----
> From: Shawn [mailto:[EMAIL PROTECTED]]
> Sent: Monday, July 29, 2002 2:17 PM
> To: Protel EDA Forum
> Subject: Re: [PEDA] PCB houses
> 
> Thank you Brad and Daniel for the board house recommendations.
> 
> -Shawn
> 
> ************************************************************************
> * Tracking #: 75C02969EABC0844834E305E61C2444A6749D4E6
> *
> ************************************************************************

-- 
___________________________________________________________________________
www.integratedcontrolsinc.com            Integrated Controls, Inc.    
   tel: 415-647-0480                        2851 21st Street          
      fax: 415-647-3003                        San Francisco, CA 94110

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Forum Guidelines Rules:
* http://www.techservinc.com/protelusers/forumrules.html
*
* Browse or Search previous postings:
* http://www.mail-archive.com/proteledaforum@techservinc.com
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Reply via email to