Shawn,
        Your welcome. Here is some further info.
        Daniel and I had a discussion offline about my comments on copper
plating limitations at Enigma. Seems that Daniel says he receives boards
with platings that I was told they couldn't (or more correctly, wouldn't)
do. So my comments may not be pertinent. If you query Enigma about that
issue then you can maybe answer us back with some final word. I know that
they have two shops, Washington State and B.C., maybe there is some
difference there and for one reason or another my boards were destined for
the shop that only did 1 oz. copper plating.

Sincerely,
Brad Velander.

Lead PCB Designer
Norsat International Inc.
Microwave Products
Tel   (604) 292-9089 (direct line)
Fax  (604) 292-9010
email: [EMAIL PROTECTED]
http://www.norsat.com


-----Original Message-----
From: Shawn [mailto:[EMAIL PROTECTED]]
Sent: Monday, July 29, 2002 2:17 PM
To: Protel EDA Forum
Subject: Re: [PEDA] PCB houses


Thank you Brad and Daniel for the board house recommendations.

-Shawn


************************************************************************
* Tracking #: 75C02969EABC0844834E305E61C2444A6749D4E6
*
************************************************************************

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Forum Guidelines Rules:
* http://www.techservinc.com/protelusers/forumrules.html
*
* Browse or Search previous postings:
* http://www.mail-archive.com/proteledaforum@techservinc.com
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Reply via email to