I think a Basic program will be better for this purpose. The script in Protel is not stable. Firstly export the BOM and pick-place files. Then use your Basic program to do the job.
-----Original Message----- From: Barry, Rick [mailto:[EMAIL PROTECTED]] Sent: Monday, September 09, 2002 3:05 PM To: '[EMAIL PROTECTED]' Subject: [PEDA] Has anyone developed a macro That will take the part numbers from the BOM in protel, using the reference designators from the pick and place file and create a text or csv file ? I simply don't know enough about this type of thing to know if that is doable. I need to end up with a pick and place file that has part designators, part numbers, the mid X & Y coordinates and the rotation. I don't need anything else. Thanks for any suggestions. Rick Barry Warner Power LLc www.warnerpower.com 603.456.4485 ************************************************************************ * Tracking #: B8B1089E60B4C647B833C1A4F64B8BCC2D743944 * ************************************************************************ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[email protected] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
