Ian Wilson has done something similar to this. His server generates a BOM which includes the ref designators from your schematics. Look for CSPartsListServer in the Archives. Madhu
----- Original Message ----- From: "Barry, Rick" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, September 09, 2002 3:04 PM Subject: [PEDA] Has anyone developed a macro > That will take the part numbers from the BOM in protel, using the reference > designators from the pick and place file and create a text or csv file ? > > I simply don't know enough about this type of thing to know if that is > doable. > > I need to end up with a pick and place file that has part designators, part > numbers, the mid X & Y coordinates and the rotation. I don't need anything > else. > > Thanks for any suggestions. > > Rick Barry > Warner Power LLc > www.warnerpower.com > 603.456.4485 ************************************************************************ * Tracking #: 8E79BE639B6AE84BB0F2B4E66C845419A6BC60AF * ************************************************************************ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[email protected] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
