we wish
but i don't think so

Dennis Saputelli

[EMAIL PROTECTED] wrote:
> 
> Okay, desperation is slowly setting in...
> 
> Is there a way to automatically "pin" the ref designator and/or part-type
> fields to specific locations within/without a component upon executing the
> Place-Part command, ie, without manual editting of said partype or ref
> designator respective locations (picture, if you will, a reference
> designator pinned to a location _internal_ to the component outline, like
> text inside a balloon, or text fixed to the lower left corner of a
> rectangle, etc.
> 
> aj
> 
> > -----Original Message-----
> > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
> >
> > A second thought, in case the original query is a bust:
> >
> > Is it possible to supress the ref-designator and part type
> > text display
> > associated with a schematic component UPON PLACEMENT, without
> > interferring
> > with the automatic display of these fileds by "normal" components?
> >
> > That is, when a component is placed, the reference designator
> > and part type
> > fields are, by default, displayed. Because of this, if the
> > user desires
> > their supression, they must be manually hidden.
> >
> > Suppose that there were two different types of situation, one
> > in which a
> > REAL component, ie, LM317, MC68332, 74HCT245, INA106, etc.,
> > uses its fields
> > normally when depositied on the schematic sheet, and where a
> > second type (a
> > pseudo-powerport) sup[resses the auto-display of the text fields.
> >
> > Can be done or no?
> >
> > thanks,
> >
> > aj
> >
> > > -----Original Message-----
> > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] >
> > >
> > > Power objects are placed on sheet without the need for
> > > reference designators
> > > or parts numbers, unlike user-created components.
> > >
> > > Because my present job entails not only the expected
> > > electronic/electrical
> > > schematic and PCB designs, but also wiring diagrams and system-level
> > > electrical and electronic drawings, I now have a great deal
> > > of need for the
> > > ability to create symbols (and buttons which deposit them)
> > > for a variety of
> > > "reusables" like color-coding symbols, wire-gauge symbols,
> > > and similar.
> > >
> > > Is this possible within P99SE's schematic editor, or am I
> > > deluding myself?
> > >
> > > Andrew J Jenkins
> > > Electrical Engineer
> > > Dover Automation Company
> > > Subsidiary of Avtron Manufacturing Inc.
> > > v: 216 642-1230 x1228
> > > f: 216 750-5105
> > > [EMAIL PROTECTED]
> > >
> >

-- 
Dennis Saputelli

  ========= send only plain text please! - no HTML ==========
_______________________________________________________________________
Integrated Controls, Inc.           www.integratedcontrolsinc.com  
2851 21st Street                    tel: 415-647-0480
San Francisco, CA 94110             fax: 415-647-3003


* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Forum Guidelines Rules:
* http://www.techservinc.com/protelusers/forumrules.html
*
* Browse or Search previous postings:
* http://www.mail-archive.com/[EMAIL PROTECTED]
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Reply via email to