Also forgot to mention logic level conversion. Convert 1.8v logic to 3.3v, & 5v, and back... _____________ Brian Guralnick
----- Original Message ----- From: Brian Guralnick To: Protel EDA Forum Sent: Sunday, March 28, 2004 6:23 PM Subject: [PEDA] Data line transformers (was: Antenna coil) My first test PCB printed with data line transformers is coming next month, no electrical connection from A side to B side. Is anybody interested? Capabilities: Get over 500 megabits from 1 side to the other. Perfect phase clock drivers & inverters. Great for isolating SPDIF/AC3/DTS audio signals, Ethernet line transformers, cheaper & smaller than optocouplers, faster by a long shot, analog signal mixers and more... Slow speed signals need only a 2 layer PCB, high speed need 4 layer. Also, 1 PCB to the next with gap sizes typically under .2 inch. (this is for super high voltage separation, in the 5-50KV and above when PCBs edges are coated.) _____________ Brian Guralnick * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[EMAIL PROTECTED] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[EMAIL PROTECTED] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
