I think you may need to specify the path of the .hex file you want to load. I think relative path naming should be fine, but it looks like you are using absolute for everything else, so that should work too.
-Jeremy On Sat, Jul 16, 2011 at 1:36 AM, Nagasrinivas Pinjala <pinja...@yahoo.com>wrote: > Hi, > > I am not able to program the LPC2378. I have connected the programming > jumper, and other connections are all fine. This is what I get after I try > to program the LPC: > > pinjalan@mydomain:~$ /opt/isp/lpc21isp -hex -wipe -control -verify > -PHILIPSARM can_a_bus.hex /dev/ttyUSB0 38400 12000 > Verify after copy RAM to Flash. > Target: Philips. > lpc21isp version 1.81 > Can't open file can_a_bus.hex > > But if I run a test command I get an OK result. > > pinjalan@mydomain:/dev$ /opt/isp/lpc21isp -detectonly -control foo > /dev/ttyUSB0 115200 14746 > lpc21isp version 1.81 > Synchronizing (ESC to abort). OK > Read bootcode version: 3 > 3 > Read part ID: LPC2378, 512 kiB ROM / 58 kiB SRAM (0x1700FD25) > > What do I do ? > > Thanks, > Naga. > > > > _______________________________________________ > psas-avionics mailing list > psas-avionics@lists.psas.pdx.edu > http://lists.psas.pdx.edu/mailman/listinfo/psas-avionics > >
_______________________________________________ psas-avionics mailing list psas-avionics@lists.psas.pdx.edu http://lists.psas.pdx.edu/mailman/listinfo/psas-avionics
