I'll be there!
On Thu, Feb 23, 2017 at 4:48 PM, Joseph Shields <shiel...@pdx.edu> wrote:
> To get an idea of how many hands we have for the layup, who is coming
> On Feb 21, 2017 8:37 PM, "Joseph Shields" <shiel...@pdx.edu> wrote:
>> Hey PSAS (specifically people who volunteered to help with making the
>> To maximize the number of people available for the layup, we're going to
>> do it Thursday night at 7 pm at PSU in EB 480. After the room-temp portion
>> of the cure cycle, I'll move the mold+plug to Motor Sports Engineering on
>> Saturday morning. We'll then cure the mold from 8 am to 7 pm. I'm
>> guaranteed to be there for the start of the cure cycle, but it's probably a
>> good idea to coordinate when people will be babysitting the oven.
>> Motor Sports Engineering is located at
>> 5307 N. Albina Ave.
>> Portland, OR 97217
>> which is a couple of blocks from PCC Cascade.
>> Both things are warm body tasks. The layup is a lot of cutting strips of
>> carbon fiber and laying them on the mold. The oven babysitting is just
>> making sure things aren't on fire. (We *should* have a working
>> controller for the oven, but's it's possible we won't. The worst-case
>> scenario is that you'll have to watch the temperature of the oven and leak
>> some hot air when it goes over temperature every few minutes.)
>> Thanks to everyone who volunteered to help with this!
>> -- Joe Shields <https://joedang.github.io/>
> psas-team mailing list
> This list's membership is automatically generated from the memberships of
> the psas-airframe, psas-avionics, and psas-general mail lists. Visit
> http://lists.psas.pdx.edu to individually subscribe/unsubscribe yourself
> from these lists.
psas-team mailing list
This list's membership is automatically generated from the memberships of the
psas-airframe, psas-avionics, and psas-general mail lists. Visit
http://lists.psas.pdx.edu to individually subscribe/unsubscribe yourself from