And, can I ask, is the Mix Control software for the Saffire range accessible on the Mac? It is under Windows, but only with Jaws and extensive hotspot clicker sets.
Saffire Pro26 here - good for the low cost.
At 12:14 PM 11/9/2015, you wrote:
I use Saffire Pro40. It has knobs for each channel as well as two
headphone jacks. It has eight channels. I use it with my drum kit all
of the time.
http://www.sweetwater.com/store/detail/SaffPro40
It is affordable, too, and can be used with Protools and any other software.
Kindly,
Vaughn
On 11/9/15, Slau Halatyn <[email protected]> wrote:
> Just because I expressed my own personal reservations about the Icon stuff
> doesn't mean it's a black sheep. It's a viable option for anybody who does
> their research and feels it's a good solution. I can't personally endorse it
> but that doesn't mean anything other than that. You should feel free to
> share any info or experience you have on the list. Along with that, you
> might be met with skepticism and that's to be expected. Facts will come out
> eventually, right? So, don't feel like you have to respond to these
> questions off list. It's up to you.
>
> Best,
>
> Slau
>
> On Nov 9, 2015, at 2:59 AM, [email protected] wrote:
>
>> Shell we do this of list? Here the Qcon seems to be a black sheep
>>
>>> Op 9 nov. 2015 om 07:38 heeft Jed Barton <[email protected]> het
>>> volgende geschreven:
>>>
>>> alright, so tell me about this 1, sounds cool
>>>
>>>> On 11/9/2015 1:18 AM, [email protected] wrote:
>>>> Icon QCon Pro!
>>>>
>>>>> Op 9 nov. 2015 om 05:40 heeft Jed Barton <[email protected]> het
>>>>> volgende geschreven:
>>>>>
>>>>> Hey guys,
>>>>> I'm looking in the same general price range for a control surface.
>>>>> Any ideas?
>>>>>
>>>>>> On 11/8/2015 3:32 PM, Darwin May wrote:
>>>>>> Hello, I know this is a old thread. But could not figure out how to
>>>>>> post a new thread. So I am asking what surface controller would you
>>>>>> recommend for a beginner? I am getting ready to buy ProTools 12. I am
>>>>>> currently using a Mac book Pro with a I five processor and 8 GB of RAM
>>>>>> and one terabyte hard drive. I am looking for something that will be
>>>>>> easy to use, also, will be able to input drums microphones for my drum
>>>>>> set any recommendations would be greatly appreciated.
>>>>>> Thanks note: looking at a price range from $700-$1500.
>>>>>>
>>>>>> Sent from my iPhone
>>>>>>
>>>>>>> On Apr 1, 2015, at 8:05 PM, TheOreoMonster <[email protected]>
>>>>>>> wrote:
>>>>>>>
>>>>>>> nothing that couldn’t easily be fixed with some dot markers and a
>>>>>>> little adhesive. The hot key matrix interns me more in program like
>>>>>>> reaper that gives you a lot of flexibility with assigning surfaces
>>>>>>> though.
>>>>>>>> On Apr 1, 2015, at 8:09 PM, Scott Gillen <[email protected]>
>>>>>>>> wrote:
>>>>>>>>
>>>>>>>> There are 8 rows of 18 keys and as far as I know there are no
>>>>>>>> tactile markings so I think it would be real easy to get lost with
>>>>>>>> a keyboard of that size.
>>>>>>>>
>>>>>>>> Scott
>>>>>>>>
>>>>>>>> Sent from my iPhone
>>>>>>>>
>>>>>>>>> On 2/04/2015, at 11:23 AM, TheOreoMonster
>>>>>>>>> <[email protected]> wrote:
>>>>>>>>>
>>>>>>>>> You are confusing the Hot Key Metrix with the Editor Keys pro Tools
>>>>>>>>> keyboard. The Editors Key Pro Tools keyboard is a standard computer
>>>>>>>>> keyboard with the Pro Tools hotKeys printed on each key along with
>>>>>>>>> the the normal letters of the keyboard. Its basically a cheat sheet
>>>>>>>>> for a sighted person so they won’t have to remember all the
>>>>>>>>> keyboard shortcuts.
>>>>>>>>>
>>>>>>>>> The hot key matrix is a controller that only has buttons and each
>>>>>>>>> of pro tools functions are assigned to a button so they can be done
>>>>>>>>> in a single button press. i think the hot key matrix has something
>>>>>>>>> like 145 or something buttons on it.
>>>>>>>>>> On Apr 1, 2015, at 2:27 PM, Poppa Bear <[email protected]>
>>>>>>>>>> wrote:
>>>>>>>>>>
>>>>>>>>>> I thought that these were more for sighted folks so that they
>>>>>>>>>> could just have a visual aid to be able to use the native Pro
>>>>>>>>>> Tools short cut keys with certain keyboard labels? I could be
>>>>>>>>>> wrong.
>>>>>>>>>>
>>>>>>>>>> -----Original Message-----
>>>>>>>>>> From: [email protected] [ mailto:[email protected]]
>>>>>>>>>> On Behalf Of Nickus de Vos
>>>>>>>>>> Sent: Wednesday, April 01, 2015 9:02 AM
>>>>>>>>>> To: [email protected]
>>>>>>>>>> Subject: Re: Control Surface Recommendations
>>>>>>>>>>
>>>>>>>>>> Not quite a control serfice but almost, any of you using or used
>>>>>>>>>> a
>>>>>>>>>> Hotkey Matrix before?
>>>>>>>>>>
>>>>>>>>>> As I understand it's basically a keyboard and all keys have
>>>>>>>>>> dedicated
>>>>>>>>>> functions in PT, so there's no key with 2 or more functions by
>>>>>>>>>> using
>>>>>>>>>> modifier keys etc. I'm just wondering if it will be useful and
>>>>>>>>>> whether
>>>>>>>>>> it will be possible to memorise the layout of all keys.
>>>>>>>>>>
>>>>>>>>>>> On 3/25/15, Mac Egbert <[email protected]> wrote:
>>>>>>>>>>> Hi Slau,
>>>>>>>>>>> for as far as I can see, other services use the same protocols as
>>>>>>>>>>> the once
>>>>>>>>>>> from Avid.
>>>>>>>>>>> I searched for this in the manual, and automation is taken care
>>>>>>>>>>> of, also for
>>>>>>>>>>> plugin parameters.
>>>>>>>>>>> I will test this Myself soonly. If it works as good as the avid
>>>>>>>>>>> controle
>>>>>>>>
>>>>>>>> --
>>>>>>>> You received this message because you are subscribed to the Google
>>>>>>>> Groups "Pro Tools Accessibility" group.
>>>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>>>> send an email to [email protected].
>>>>>>>> For more options, visit https://groups.google.com/d/optout.
>>>>>>>
>>>>>>> --
>>>>>>> You received this message because you are subscribed to the Google
>>>>>>> Groups "Pro Tools Accessibility" group.
>>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>>> send an email to [email protected].
>>>>>>> For more options, visit https://groups.google.com/d/optout.
>>>>>
>>>>> --
>>>>> You received this message because you are subscribed to the Google
>>>>> Groups "Pro Tools Accessibility" group.
>>>>> To unsubscribe from this group and stop receiving emails from it, send
>>>>> an email to [email protected].
>>>>> For more options, visit https://groups.google.com/d/optout.
>>>
>>> --
>>> You received this message because you are subscribed to the Google Groups
>>> "Pro Tools Accessibility" group.
>>> To unsubscribe from this group and stop receiving emails from it, send an
>>> email to [email protected].
>>> For more options, visit https://groups.google.com/d/optout.
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Pro Tools Accessibility" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to [email protected].
>> For more options, visit https://groups.google.com/d/optout.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Pro Tools Accessibility" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to [email protected].
> For more options, visit https://groups.google.com/d/optout.
>
--
Vaughn Brown
Berklee College of Music Graduate, Bachelor in Music, Drummer, educator
504-202-8492
http://www.vaughnbrown.net
--
You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [email protected].
For more options, visit https://groups.google.com/d/optout.
You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [email protected].
For more options, visit https://groups.google.com/d/optout.
