That there was my main concern. Given my difficulty with recognizing pitches i was concerned i may not catch sync issues as quickly as others. However, If the DAW will pop up a error message then I imagine i should be Alright then .
> On Nov 26, 2015, at 1:15 PM, Slau Halatyn <[email protected]> wrote: > > Yeah, the sample rate being set by external buttons can certainly be an > issue. I once had a problem during a remote session at a venue where a > DigiMax interface with ADAT output was the clock master and I had > inadvertently hit the sample rate button which jumped it from 48K to 32K. > Little did I know that, as a result, the ADAT transport was now recording a > 32K rate at a 48K speed so the resulting audio, when played back, was several > notes higher and faster than the original. Luckily, I was able to find an old > Otari external clock that had the ability to output clock as low as 32K and > we played back the material at normal speed and re-recorded onto another ADAT > machine. Of course, the frequency response was now limited to 16K but nobody > noticed at all and it was only for one of the songs on the album. Geez, those > were the days… > > For LightPipe input, at least with Pro Tools, you're alerted if the sample > rates don't match so the inadvertent button presses aren't an issue. I've > used a Focusrite OctoPre some years ago for a few remote live shows and it > worked really well. Again, that was thanks to the confidence of not having > clock issues within Pro Tools. These days, I'd imagine that most DAWs would > behave the same way. > > Slau > > On Nov 26, 2015, at 11:58 AM, TheOreoMonster <[email protected]> wrote: > >> Hey, Need some more I/O and considering either a second interface or adding >> more I/O to the current one via ADAT. Any blind user have any experiences >> with and ADAT system? Pros/Cons? I am concerned about keeping the sample >> rates in sync as these are usually denoted via flashing lights or etc and >> loosing I/O count if you want to record above 48,000khz. However the last is >> more Theoretical as i don’t presume I will be recording a full drum kit >> anytime soon. Just wanted some thoughts. >> Thanks and hope everyone enjoys the Holiday if celebrating. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
