Hey guys, quick nav is not the issue, here. When it does happen, i am very careful about making sure quick nav is off. as you can’t make selections if quick nav is on. Strange no-one else has seen this, as i’ve noticed it on two machines. i’ll try control p and semicolon next time it happens and see if that helps.Thanks anyway for your thoughts. Steve
> On 2 Mar 2019, at 5:04 am, Slau Halatyn <slauhala...@gmail.com> wrote: > > Ah, I've reread Steve's message and, indeed, he specifically says that he > makes the selection while VoiceOver is off. Yes, sounds like it could very > well be QuickNav in his case. > Slau > > >> On Mar 1, 2019, at 11:01 AM, Steve Martin <monkeypushe...@gmail.com> wrote: >> >> Agreed with Martin here, my first thought too was that quick nav is on. It >> sounds like he is using up and down arrows to make the selection while voice >> over is off which means quick nav would be disabled. I am guessing Slau that >> you are intrupretting it as Steve turning VoiceOver off then on again and >> then miraculously the selection works with up and down arrows, which if >> thats the case then yes the issue wouldn’t be quick nav being on. Maybe >> Steve can clarify which it is? >> >> >>> On Mar 1, 2019, at 10:52 AM, Martin (Punky) Sopart <m...@cakewalker.de> >>> wrote: >>> >>> Shure. He wrote that he turns off VO to make the selection and after taht >>> he turns VO on again. >>>> -----Original Message----- >>>> From: ptaccess@googlegroups.com [mailto:ptaccess@googlegroups.com] >>>> On Behalf Of Slau Halatyn >>>> Sent: Friday, March 1, 2019 4:51 PM >>>> To: PTAccess List <ptaccess@googlegroups.com> >>>> Subject: Re: ProTools and short-cut >>>> >>>> If what Steve is saying is accurate, it wouldn't be QuickNav because >>>> QuickNav >>>> is persistent through VoiceOver relaunches. In other words, if you turned >>>> off >>>> VoiceOver while QuickNav is enabled, it'll still be enabled when you turn >>>> VoiceOver back on. >>>> >>>> >>>>> On Mar 1, 2019, at 10:32 AM, Martin (Punky) Sopart <m...@cakewalker.de> >>>> wrote: >>>>> >>>>> Sounds like quick navigation is on... >>>>> >>>>> Best! / Martin >>>>>> -----Original Message----- >>>>>> From: ptaccess@googlegroups.com [mailto:ptaccess@googlegroups.com] >>>>>> On Behalf Of Slau Halatyn >>>>>> Sent: Friday, March 1, 2019 4:25 PM >>>>>> To: PTAccess List <ptaccess@googlegroups.com> >>>>>> Subject: Re: ProTools and short-cut >>>>>> >>>>>> Hi Steve, >>>>>> That sounds unusual. Not sure why that would be the case. Next time you >>>>>> can't make a selection, assuming the other things I mentioned are sorted, >>>> try >>>>>> using Control p or semicolon to create/move the insertion cursor and see >>>>>> what happens. >>>>>> Best, >>>>>> Slau >>>>>> >>>>>> >>>>>>> On Feb 27, 2019, at 4:43 PM, Steve Sparrow >>>> <i...@sparrowsound.com.au> >>>>>> wrote: >>>>>>> >>>>>>> the other thing i’ve noticed with up and down arrow making selections, >>>> is >>>>>> that at times the only way I can make a selection is to quit voice over, >>>> make >>>>>> my selection, then relaunch voice over. It does not happen all the time, >>>> but is >>>>>> there a reason for this, or is it something in my set up. I can always >>>>>> get >>>>>> around this, but i’d be interested to know why this happens at times, and >>>> if >>>>>> the problem is something at my end. >>>>>>> Steve >>>>>>> >>>>>>> >>>>>>>> On 28 Feb 2019, at 1:38 am, Slau Halatyn <slauhala...@gmail.com> >>>> wrote: >>>>>>>> >>>>>>>> It could be several things. First of all, you should be aware that >>>>>>>> pressing >>>>>> down and up arrow to make a selection only works when there's an >>>> insertion >>>>>> point in a track. It won't work if you've just imported audio to a track >>>>>> and >>>>>> have not either moved the track selection with Control p or semicolon or >>>>>> scrubbed within a track. Further, you should make sure the preference >>>> for >>>>>> insertion following scrub is checked. For that matter, you need to make >>>> sure >>>>>> insertion is not following playback or else no selection will be made. >>>>>> Make >>>>>> sure QuickNav is off and make sure you have track view set to waveform. >>>> If >>>>>> you're in an instrument track, make sure you're in clips view and not in >>>> notes >>>>>> view. There are any number of things you need to be aware of. >>>>>>>> Slau >>>>>>>> >>>>>>>> >>>>>>>>> On Feb 26, 2019, at 7:00 PM, Dammie Onafeko >>>>>> <mindofdhe...@gmail.com> wrote: >>>>>>>>> >>>>>>>>> Hi guys! I'm hitting the up and down arrow keys to make a selection, >>>>>>>>> but nothing is happening. What is wrong with my setting? I often run >>>>>>>>> into this problem. somebody help. >>>>>>>>> Dammie >>>>>>>>> >>>>>>>>> -- >>>>>>>>> You received this message because you are subscribed to the Google >>>>>> Groups "Pro Tools Accessibility" group. >>>>>>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>>> an email to ptaccess+unsubscr...@googlegroups.com. >>>>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>>> >>>>>>>> -- >>>>>>>> You received this message because you are subscribed to the Google >>>>>> Groups "Pro Tools Accessibility" group. >>>>>>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an >>>>>> email to ptaccess+unsubscr...@googlegroups.com. >>>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>> >>>>>>> -- >>>>>>> You received this message because you are subscribed to the Google >>>>>> Groups "Pro Tools Accessibility" group. >>>>>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an >>>>>> email to ptaccess+unsubscr...@googlegroups.com. >>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>> >>>>>> -- >>>>>> You received this message because you are subscribed to the Google >>>> Groups >>>>>> "Pro Tools Accessibility" group. >>>>>> To unsubscribe from this group and stop receiving emails from it, send an >>>>>> email to ptaccess+unsubscr...@googlegroups.com. >>>>>> For more options, visit https://groups.google.com/d/optout. >>>>> >>>>> -- >>>>> You received this message because you are subscribed to the Google >>>> Groups "Pro Tools Accessibility" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send an >>>> email to ptaccess+unsubscr...@googlegroups.com. >>>>> For more options, visit https://groups.google.com/d/optout. >>>> >>>> -- >>>> You received this message because you are subscribed to the Google Groups >>>> "Pro Tools Accessibility" group. >>>> To unsubscribe from this group and stop receiving emails from it, send an >>>> email to ptaccess+unsubscr...@googlegroups.com. >>>> For more options, visit https://groups.google.com/d/optout. >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to ptaccess+unsubscr...@googlegroups.com. >>> For more options, visit https://groups.google.com/d/optout. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to ptaccess+unsubscr...@googlegroups.com. >> For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
