I made my first attempt to deploy my configured ALIX board today - no joy. Verizon FIOS is configured to talk to a specific MAC address.
I've just spent a fruitless few hours attempting to change the MAC address on the ALIX WAN port - the /etc/config/network "option macaddr" command doesn't work, the nvram command is not in OpenWRT Kamikaze, and I can't find any suggestions on the PC Engines site or in the brief ALIX manual for manipulating the MAC address. I will try one of the alternate softwares (monowall, ?) on a different CF card. If I come up with something that works, then I will let the list know. Otherwise, this may be a significant handicap for using Alix boards in enironments where we have to clone MAC addresses. Keith -- Keith Lofstrom [email protected] Voice (503)-520-1993 KLIC --- Keith Lofstrom Integrated Circuits --- "Your Ideas in Silicon" Design Contracting in Bipolar and CMOS - Analog, Digital, and Scan ICs --~--~---------~--~----~------------~-------~--~----~ The Personal Telco Project - http://www.personaltelco.net/ Donate to PTP: http://www.personaltelco.net/donate Archives: http://news.gmane.org/gmane.network.wireless.portland.general/ Etiquette: http://www.personaltelco.net/index.cgi/MailingListEtiquette List information: http://lists.personaltelco.net To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] -~----------~----~----~----~------~----~------~--~---
