Hi Michael Yes, I am using the built in mike. I thought I used to be able to adjust the levels - has this changed in firmware updates?
However, the recordings I have made so far are more than adequate, so I am just pleased to hear that the unit isn't broken. Respectfully ... Scott T: 0117 955 0605 M: 0787 078 0727 F: 0117 902 5680 E: [EMAIL PROTECTED] ----- Original Message ----- From: "Michael Lang" <[EMAIL PROTECTED]> To: "Scott Wood" <[email protected]> Sent: Saturday, February 19, 2005 11:32 AM Subject: Re: Recording levels > Do you use the built-in microphone? One cannot adjust the recording > volume, when one does this. If the level is high with the built-in mic, > the reader has to get further away or read with a lower voice. > > <*** Michael Lang ***> > > You wrote: > > > Hi > > > I have been recording someone reading for me. When I press the record button the PTR1 reports that it is recording to daisy format, 32 kbs and set to reading mode. I am recording to a 5 gb > > microdrive. > > > When I try to adjust the recording level, I get the *can't do this* tone. It keeps reporting that the recording level is high and so I would like to bring it down a bit, but it won't let me. > > > If I come out of recording standby mode, I can adjust the recording levels as normal, but then I don't know if it's high, low or good. I haven't upgraded to the latest firmware version, I'm still > > running on 2.00eng. Any thoughts or help most welcome. > > > Respectfully ... Scott > > > T: 0117 955 0605 > > M: 0787 078 0727 > > F: 0117 902 5680 > > E: [EMAIL PROTECTED] > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
