>I am not sure what you mean. When people say "nothing to select",
>sometimes they mean "empty menu with no text at all", and sometimes
>"only one item, already selected, nothing else to try".
Okay. In pavucontrol, the Configuration tab lists both the HDMI
and the Internal Audio. But as far as I can tell, it merely lists them.
I don't need to click on anything in that tab, right?
>It would help if you post the output of the following command:
>
>pacmd ls
Are you sure? That comand lists 23 modules and the output is more
than 700 lines.
>1. cat /proc/asound/cards
I did this. My output was very similar to your output.
> 2. aplay -L
I did this and the output was very similar to yours.
> speaker-test -l2 -c2 -D front:CARD=MID,DEV=0
It produced the hissing sound through the analog speakers.
>speaker-test -l2 -c2 -D hdmi:CARD=NVidia,DEV=0
This worked and produced the hissing sound through the TV
speakers. I used DEV=1.
Thanks very much for you help. I hope we are getting close to the
solution for this.
_______________________________________________
pulseaudio-discuss mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/pulseaudio-discuss
