#699: emu10k1x 2.0=>5.1 behaivour
----------------------------+-----------------------------------------------
Reporter: vasily_pupkin | Owner: lennart
Type: defect | Status: new
Milestone: | Component: module-alsa-*
Resolution: | Keywords: emu10k1x
----------------------------+-----------------------------------------------
Description changed by lennart:
Old description:
> I have Audigy4 audio card. It has two hw devices: x,0 and x,3, where x,0
> - analog 2 channel and multichannel x,3. Seems like pulse always use x,3.
> When I listen 2 channel audio, it plays only on 2/6 (front) speakers. If
> I manually add sink to x,0 I can listen 2 channel music on 6/6 speakers.
> Changing profile do nothing to this situation. But 5.1 films ok on 5.1
> profile.
>
> Cards/sinks added with HAL detection.
>
> Some info:
>
> ava...@aliso ~ % cat ~/.pulse/default.pa
> load-module module-alsa-sink device=surround51:0 rate=48000
> sink_name=ch51
> load-module module-hal-detect
> load-module module-alsa-sink device=hw:0 sink_name=ch20
> load-module module-bluetooth-discover
> load-module module-zeroconf-publish
> load-module module-native-protocol-tcp auth-ip-
> acl=172.16.1.1;127.0.0.1;172.16.1.0/24;172.16.0.0/16 listen=172.16.1.1
> load-module module-stream-restore
> load-module module-device-restore
> load-module module-default-device-restore
> load-module module-rescue-streams
> load-module module-always-sink
> load-module module-console-kit
> set-default-sink ch20
>
> ava...@aliso ~ % pulseaudio --version
> pulseaudio 0.9.19
>
> ava...@aliso ~ % aplay -L
> default:CARD=Audigy2
> SB Audigy 4 [SB0610], ADC Capture/Standard PCM Playback
> Default Audio Device
> front:CARD=Audigy2,DEV=0
> SB Audigy 4 [SB0610], ADC Capture/Standard PCM Playback
> Front speakers
> rear:CARD=Audigy2,DEV=0
> SB Audigy 4 [SB0610], ADC Capture/Standard PCM Playback
> Rear speakers
> center_lfe:CARD=Audigy2,DEV=0
> SB Audigy 4 [SB0610], ADC Capture/Standard PCM Playback
> Center and Subwoofer speakers
> side:CARD=Audigy2,DEV=0
> SB Audigy 4 [SB0610], ADC Capture/Standard PCM Playback
> Side speakers
> surround40:CARD=Audigy2,DEV=0
> SB Audigy 4 [SB0610], ADC Capture/Standard PCM Playback
> 4.0 Surround output to Front and Rear speakers
> surround41:CARD=Audigy2,DEV=0
> SB Audigy 4 [SB0610], ADC Capture/Standard PCM Playback
> 4.1 Surround output to Front, Rear and Subwoofer speakers
> surround50:CARD=Audigy2,DEV=0
> SB Audigy 4 [SB0610], ADC Capture/Standard PCM Playback
> 5.0 Surround output to Front, Center and Rear speakers
> surround51:CARD=Audigy2,DEV=0
> SB Audigy 4 [SB0610], ADC Capture/Standard PCM Playback
> 5.1 Surround output to Front, Center, Rear and Subwoofer speakers
> surround71:CARD=Audigy2,DEV=0
> SB Audigy 4 [SB0610], ADC Capture/Standard PCM Playback
> 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
> iec958:CARD=Audigy2,DEV=0
> SB Audigy 4 [SB0610], ADC Capture/Standard PCM Playback
> IEC958 (S/PDIF) Digital Audio Output
New description:
I have Audigy4 audio card. It has two hw devices: x,0 and x,3, where x,0 -
analog 2 channel and multichannel x,3. Seems like pulse always use x,3.
When I listen 2 channel audio, it plays only on 2/6 (front) speakers. If I
manually add sink to x,0 I can listen 2 channel music on 6/6 speakers.
Changing profile do nothing to this situation. But 5.1 films ok on 5.1
profile.
Cards/sinks added with HAL detection.
Some info:
{{{
ava...@aliso ~ % cat ~/.pulse/default.pa
load-module module-alsa-sink device=surround51:0 rate=48000 sink_name=ch51
load-module module-hal-detect
load-module module-alsa-sink device=hw:0 sink_name=ch20
load-module module-bluetooth-discover
load-module module-zeroconf-publish
load-module module-native-protocol-tcp auth-ip-
acl=172.16.1.1;127.0.0.1;172.16.1.0/24;172.16.0.0/16 listen=172.16.1.1
load-module module-stream-restore
load-module module-device-restore
load-module module-default-device-restore
load-module module-rescue-streams
load-module module-always-sink
load-module module-console-kit
set-default-sink ch20
ava...@aliso ~ % pulseaudio --version
pulseaudio 0.9.19
ava...@aliso ~ % aplay -L
default:CARD=Audigy2
SB Audigy 4 [SB0610], ADC Capture/Standard PCM Playback
Default Audio Device
front:CARD=Audigy2,DEV=0
SB Audigy 4 [SB0610], ADC Capture/Standard PCM Playback
Front speakers
rear:CARD=Audigy2,DEV=0
SB Audigy 4 [SB0610], ADC Capture/Standard PCM Playback
Rear speakers
center_lfe:CARD=Audigy2,DEV=0
SB Audigy 4 [SB0610], ADC Capture/Standard PCM Playback
Center and Subwoofer speakers
side:CARD=Audigy2,DEV=0
SB Audigy 4 [SB0610], ADC Capture/Standard PCM Playback
Side speakers
surround40:CARD=Audigy2,DEV=0
SB Audigy 4 [SB0610], ADC Capture/Standard PCM Playback
4.0 Surround output to Front and Rear speakers
surround41:CARD=Audigy2,DEV=0
SB Audigy 4 [SB0610], ADC Capture/Standard PCM Playback
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Audigy2,DEV=0
SB Audigy 4 [SB0610], ADC Capture/Standard PCM Playback
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Audigy2,DEV=0
SB Audigy 4 [SB0610], ADC Capture/Standard PCM Playback
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Audigy2,DEV=0
SB Audigy 4 [SB0610], ADC Capture/Standard PCM Playback
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=Audigy2,DEV=0
SB Audigy 4 [SB0610], ADC Capture/Standard PCM Playback
IEC958 (S/PDIF) Digital Audio Output
}}}
--
--
Ticket URL: <http://pulseaudio.org/ticket/699#comment:1>
PulseAudio <http://pulseaudio.org/>
The PulseAudio Sound Server
_______________________________________________
pulseaudio-tickets mailing list
pulseaudio-tickets@mail.0pointer.de
https://tango.0pointer.de/mailman/listinfo/pulseaudio-tickets
