Hi Scott, Thank you for your response, I'll look into the thread.
I am using a Cisco UCS C220 M4 Rack Server: http://www.cisco.com/c/en/us/products/servers-unified-computing/ucs-c220-m4-rack-server/index.html Kind regards, Alexander Op donderdag 18 augustus 2016 18:40:18 UTC+2 schreef Scott McClellan: > > Hi Alexander, > > It looks like this might be a problem with sanboot. This thread may be of > interest to you: > https://groups.google.com/forum/#!topic/puppet-razor/QtHA7Kfa-II — The > solution provided there is around overriding the boot_local.erb file to get > around (essentially remove) the sanboot ipxe command. > > Can you tell me a bit about the hardware you are using, to see if you have > hardware similar to the thread above? > > Hope that helps! > > Scott > > On Fri, Aug 12, 2016 at 11:31 AM Alexander Cogneau <[email protected] > <javascript:>> wrote: > >> Hi all, >> >> I've succesfully installed and configured razor-server (at least I hope >> so) and I'm trying to let them boot CentOS 7. I created the policy, tags, >> repo ... and when it boots the first time CentOS is installed (with the >> default Centos/7.task). But then it goes wrong. I know that CentOS is >> installed succesfully because when I put the HDD on top in the boot order, >> the CentOS installation boots without doing DHCP and PXE. >> >> When I put the netwerk adapter on top of the boot order, it starts iPXE >> and connects with the razor-server, but then I get this output: >> >> Red Hat Enterprise Linux 6 (Installed by Razor0 >>> Installation node: http://10.9.14.50:8150/api/nodes/6 >>> Installation repo: http://10.9.14.50:8150/svc/repo/centos-7/ >>> forcing local booting with sanboot 0x80 >>> Booting from SAN device 0x80 >>> Boot from SAN device 0x80 failed: Exec format error ( >>> http://ipe.org/2e852001) >>> Could not boot: Exec format error (http://ipxe.org/2e852001) >>> Could not boot image: Result too large (http://ipxe.org/46022001) >>> No more network devices >> >> >> Does anyone know how I can fix this? >> >> Thanks already! >> >> -- >> You received this message because you are subscribed to the Google Groups >> "puppet-razor" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected] <javascript:>. >> To post to this group, send email to [email protected] >> <javascript:>. >> Visit this group at https://groups.google.com/group/puppet-razor. >> For more options, visit https://groups.google.com/d/optout. >> > -- > -- > PuppetConf 2016 <https://puppet.com/puppetconf>, 19 - 21 October, San > Diego, California > *Summer Savings - Register by 15 September and save $240 > <https://puppetconf2016.eventbrite.com/?discount=SummerSavings>* > -- You received this message because you are subscribed to the Google Groups "puppet-razor" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/puppet-razor. For more options, visit https://groups.google.com/d/optout.
